Product ID:11105 RED GLOSS ALKYD ENAMEL
MSDS Date:04/29/1987
FSC:8010
NIIN:00F009787
MSDS Number: BHLPQ

EVERSEAL MANUFACTURING CO, INC

475 BROAD AVENUE
RIDGEFIELD, NJ 07657

Emergency Phone: (201) 943-4986

Info Phone: (201) 943-4986

Preparer: FRANK PRIMERANO

Cage: EO432

EVERSEAL MFG CO INC

RIDGEFIELD, NJ 07657-2329 US

Telephone: 201-943-4986

Cage: 72988

RESIN

Fraction By Weight: 38%

TOLUIDINE RED, PIGMENT RED 3

CAS: 2425-85-6

RTECS: QK4247000

Fraction By Weight: 11%

MINERAL SPIRITS

CAS: 64742-86-5

RTECS: LX3296500

Fraction By Weight: 50%

OSHA PEL 120 PPM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, NAUSEA, &
POSSIBLE UNCONSCIOUSNESS. SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, & POSSIBLE
UNCONSCIOUSNESS. SKIN/EYES: IRRITATION.

First Aid:INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION
IF NECESSARY. EYES: FLUSH W/WATER. SKIN: WASH W/SOAP & WATER.
CONSULT PHYSICIAN.

Flash Point:105F
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS. WATER NOT A SUITABLE EXTINGUISHING MEDIUM.

Spill Release Procedures:REMOVE IGNITION SOURCES. ENSURE ADEQUATE
VENTILATION. ABSORB SMALL SPILLS ON DRY ABSORPTION MATERIAL. USE
SPARK-PROOF SCOOP FOR LARGER SPILLS.

Handling and Storage Precautions:AVOID EXCESSIVE HEAT & OPEN IGNITION
SOURCES.

Respiratory Protection:IF TLV MAY BE EXCEEDED, USE CARTRIDGE FUME MASK.
Ventilation:PROVIDE SUFFICIENT VENTILATION TO ENSURE LEL NOT ACHIEVED.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING, BARRIER CREAM.
Supplemental Safety and Health
WT PER GAL: 7.7 LBS.

Boiling Pt:B.P. Text:323-390F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:RED GLOSS ALKYD ENAMEL
Percent Volatiles by Volume:60%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT & OPEN IGNITION SOURCES.
Hazardous Decomposition Products:CO, CO2

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL & FEDERAL
REGULATIONS FOR HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.